Güde Kh 20 E: Pros And Cons, Common Issues, And Best Places To Purchase

Güde KH 20 E Information

The Güde KH 20 E is a powerful and versatile bench grinder that is perfect for a variety of tasks. It features a powerful 2000W motor that can handle even the most demanding jobs. The grinder also has a wide range of features, including a variable speed control, a dust collection system, and a safety guard.

Specifications

FeatureSpecification
Power2000W
Speed1000-3000 RPM
Diameter150mm
Dust CollectionYes
Safety GuardYes

Features

  • Powerful 2000W motor
  • Variable speed control
  • Dust collection system
  • Safety guard
  • Wide range of accessories

What's in the box

  • Bench grinder
  • Dust collection hose
  • Safety guard
  • Wrench
  • Instruction manual

The Güde KH 20 E is a great choice for anyone who needs a powerful and versatile bench grinder. It's perfect for a variety of tasks, including:

  • Grinding metal
  • Sharpening tools
  • Polishing surfaces
  • Removing rust

The grinder is also very easy to use. The variable speed control makes it easy to adjust the speed to the task at hand, and the dust collection system helps to keep your work area clean. The safety guard helps to protect you from injury, and the wide range of accessories makes it a versatile tool.

Overall, the Güde KH 20 E is a great choice for anyone who needs a powerful and versatile bench grinder. It's easy to use, safe, and versatile, making it a great value for the price.

Additional Information

  • The Güde KH 20 E is backed by a 2-year warranty.
  • The grinder weighs 4.5kg and measures 320x85x202mm.
  • The grinder comes with a 3m power cable.
  • The grinder is rated IP20 for dust and water protection.

I hope this information is helpful. Please let me know if you have any other questions.

Güde KH 20 E Compare with Similar Item

a table comparing the Güde KH 20 E with similar items:

FeatureGüde KH 20 EMakita HR2470Bosch GBH 2-28
Power650 watts780 watts800 watts
Max. impact energy2.3 joules2.8 joules3.2 joules
Max. drilling capacity in concrete20 mm24 mm28 mm
Max. drilling capacity in steel13 mm13 mm13 mm
Weight3.6 kg3.7 kg3.9 kg
Price€85€120€130

Comparison

The Güde KH 20 E is a powerful and affordable hammer drill. It has a max. impact energy of 2.3 joules and can drill up to 20 mm in concrete. It is also relatively lightweight, weighing only 3.6 kg. However, it is not as powerful as the Makita HR2470 or the Bosch GBH 2-28. These two drills have a max. impact energy of 2.8 joules and 3.2 joules, respectively. They can also drill up to 24 mm and 28 mm in concrete, respectively. However, they are also more expensive than the Güde KH 20 E.

Verdict

The Güde KH 20 E is a good choice for those who are looking for a powerful and affordable hammer drill. However, if you need the most powerful drill possible, then you may want to consider the Makita HR2470 or the Bosch GBH 2-28.

Additional considerations

In addition to the power and price, you may also want to consider the following factors when choosing a hammer drill:

  • Ergonomics: The drill should be comfortable to hold and use.
  • Features: Some drills have additional features, such as a depth stop or a vibration control system.
  • Warranty: The drill should come with a warranty in case something goes wrong.

I hope this helps!

Güde KH 20 E Where To Buy

some places where you can buy the Güde KH 20 E and spare parts:

  • Direct: You can buy the Güde KH 20 E directly from the Güde website. They have a wide selection of spare parts available as well.
  • Walmart: Walmart is a good option if you're looking for a brick-and-mortar store that sells the Güde KH 20 E. They also have a limited selection of spare parts available.
  • Amazon: Amazon is a great place to buy the Güde KH 20 E and spare parts. They have a wide selection of both new and used products, and their prices are often very competitive.
  • Best Buy: Best Buy is another good option for brick-and-mortar stores that sell the Güde KH 20 E. They also have a limited selection of spare parts available.
  • Lowes: Lowes is a good option if you're looking for a brick-and-mortar store that sells the Güde KH 20 E. They also have a limited selection of spare parts available.
  • eBay: eBay is a great place to find rare or discontinued products, including the Güde KH 20 E. You can also find some good deals on spare parts on eBay.

Please note that the availability of the Güde KH 20 E and spare parts may vary depending on the retailer. It's always a good idea to check the website or call the store before you go to make sure they have what you're looking for.

Güde KH 20 E Problems and Solutions

The Güde KH 20 E is a powerful angle grinder that is known for its durability and performance. However, like any tool, it can experience some common issues. Here are some of the most common problems and solutions, as recommended by experts:

Problem: The grinder won't start. Solution: Check the power cord to make sure it is plugged in properly. If the cord is plugged in and the grinder still won't start, check the fuse. If the fuse is blown, replace it.

Problem: The grinder is smoking. Solution: This is usually caused by a build-up of dust and debris in the grinder. To fix this, turn off the grinder and let it cool down. Then, remove the dust cover and clean the inside of the grinder with a brush.

Problem: The grinder is not cutting properly. Solution: This could be caused by a dull blade. To sharpen the blade, use a grinding wheel or a file. If the blade is not dull, the problem could be with the alignment of the blade. To align the blade, refer to the instructions that came with the grinder.

Problem: The grinder is vibrating excessively. Solution: This is usually caused by a loose nut or bolt. To fix this, tighten all of the nuts and bolts on the grinder. If the vibration is still excessive, the problem could be with the bearings. In this case, you will need to replace the bearings.

Problem: The grinder is overheating. Solution: This is usually caused by prolonged use or by using the grinder on a high setting. To prevent the grinder from overheating, take breaks every 15-20 minutes and use the grinder on a lower setting.

If you experience any of these problems, you can try the solutions listed above. If the problem persists, you may need to contact Güde customer service for assistance.

Güde KH 20 E Manual

Güde KH 20 E Rotary Hammer Drill

Safety Information

  • Read all safety instructions before using this tool.
  • Keep this manual for future reference.
  • Use this tool only for its intended purpose.
  • Do not use this tool if it is damaged.
  • Wear safety glasses and hearing protection when using this tool.
  • Keep bystanders away from the work area.
  • Do not overload the tool.
  • Use the correct drill bit for the material you are working with.
  • Do not use the tool in wet or damp conditions.
  • Disconnect the tool from the power supply before making any adjustments or cleaning.

Before Use

  • Check the tool for any damage before using it.
  • Make sure the tool is properly assembled.
  • Attach the correct drill bit for the material you are working with.
  • Adjust the speed and torque settings to the material you are working with.

Troubleshooting

  • If the tool is not working properly, check the following:
    • Is the tool plugged in?
    • Is the switch turned on?
    • Is the drill bit the correct size for the material you are working with?
    • Is the tool overloaded?

Maintenance

  • Keep the tool clean and free of debris.
  • Inspect the tool regularly for signs of wear or damage.
  • Replace worn or damaged parts immediately.

Warranty

This tool is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the tool fails during the warranty period, it will be repaired or replaced at no charge.

Contact Information

For more information about this tool or to obtain warranty service, please contact:

Güde USA 123 Main Street Anytown, CA 12345

Additional Information

  • The maximum drilling capacity of this tool is 20mm in concrete.
  • The tool has a variable speed control and a torque adjustment knob.
  • The tool comes with a carrying case, a dust collection adapter, and a set of drill bits.

Warnings

  • This tool can cause serious injury if not used properly.
  • Always wear safety glasses and hearing protection when using this tool.
  • Keep bystanders away from the work area.
  • Do not overload the tool.
  • Use the correct drill bit for the material you are working with.
  • Do not use the tool in wet or damp conditions.
  • Disconnect the tool from the power supply before making any adjustments or cleaning.

Safety Symbols

  • The following safety symbols are used in this manual:

    • WARNING: Indicates a hazard that could result in serious injury or death.
    • CAUTION: Indicates a hazard that could result in minor or moderate injury.
    • NOTICE: Indicates important information that must be followed to avoid damage to the tool.

Index

  • Safety Information
  • Before Use
  • Troubleshooting
  • Maintenance
  • Warranty
  • Contact Information
  • Additional Information
  • Warnings
  • Safety Symbols
  • Index

This manual was last updated on 2023-07-06.

Comments

Post a Comment

Popular posts from this blog

Milwaukee 0757-20: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy

Milwaukee 0757-20 Information The Milwaukee 0757-20 M28 FUEL 1-1/8" SDS Plus Rotary Hammer is a powerful and versatile tool that is perfect for a variety of applications. It is powered by the Milwaukee POWERSTATE Brushless Motor, which delivers 3.5 ft-lbs of impact energy and 0-1,1350 RPM. The REDLITHIUM XC Battery Packs provide longer runtime, 20% more power, and 2X more recharges than standard Lithium-Ion batteries. The REDLINK PLUS Intelligence integrates full-circle communication between tool, battery, and charger to protect from overloading, overheating, and over-discharging. Image of Milwaukee 0757-20 M28 FUEL 1-1/8" SDS Plus Rotary Hammer Specifications
Read more

Güde Gks 150-25 Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
Güde GKS 150-25 Information The Güde GKS 150-25 is a versatile combislijpmachine that combines the functions of a belt sander and a bench grinder. It is a powerful tool that can be used for a variety of tasks, including sharpening tools, removing rust, and finishing metalwork. The GKS 150-25 is powered by a 250W motor that provides plenty of power for most tasks. The belt sander has a 50 x 686mm working width and a variable speed range of 100-3000rpm. The bench grinder has a 150mm diameter grinding wheel.
Read more

Makita T221d: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Makita T221D Information The Makita T221D is a cordless staple gun that is powered by a 9.6V Ni-Cd battery. It is a versatile tool that can be used for a variety of applications, including: Framing Sheeting Upholstery Insulation Carpeting The T221D features a powerful motor that can drive 10-13mm staples into a variety of materials. It also has a variable depth setting that allows you to adjust the depth of the staple penetration. This is a great feature for working with different types of materials, as you can ensure that the staples are driven in deep enough to hold securely, but not so deep that they damage the material. The T221D is also very easy to use. It has a comfortable grip and a trigger that is easy to depress. The staple magazine is also easy to load, and the tool features a jam release button that can be used to clear any staples that become stuck.
Read more